Run Santa, Run

It seems that there was a Christmas fun run this Sunday, so there were hundreds of people in Santa Claus outfits running along the road next to the flying field. Despite being sunny, the wind was very strong and it was bitterly cold. It’s mornings like this that make me wonder why I do it.

But back to the flying. I was first one there this morning and was on my own for a while, until my friend with the EFlite Advance 25e turned up. It turns out that he had been driving around for an hour trying to find a space in the car park, but all the Santas had got there first, so he had to use the car park miles away and walk around the river and across the fields. He was closely followed by the guy who makes the foam board aircraft. This time he turned up on a bike with a small swept delta flying wing in his backpack. Just like me, he had made it specifically to fit the backpack so that he could cycle over with it easily. It flew really well in the wind as it’s very quick and has an amazing roll rate. Apparently, the wing tips are held on with magnets so that you can pull them off. This probably helps on the landings as they would knock off without damage.

On the subject of landings, my first flight with the RS352 was one of my best landings for a while. In a very strong wind I managed to get it right down to the deck in front of my and hover onto the wheels perfectly. For this aircraft in windy conditions, that’s probably the best technique. Come in fast and steep and use the power to hover it down to the ground. I can’t help thinking of the Eric Brown book, “Wings on My Sleeve” and his technique for landing a Mosquito on an aircraft carrier when the required landing speed is lower than the stall speed of the aircraft. After that I had another three flights with the RS352, which was handling the blustery conditions very well indeed. The last take-off was a bit exciting though, as I forgot to set the flap switch down. I thought it didn’t climb away from my hand quite how it normally does, then realised that the flaps were in the up position with the associated nose down moment. I had been flying with this setting on and off because of the conditions, but I do really need to get the program right to mix out the nose down automatically. Normally I just fly it as it is which is a bad habit to get into.

Just as I was leaving another person turned up on a bike with a DJI Phantom Quadcopter in its hard backpack. I watched him set it up and fly it before I had to leave. The props are interesting the way they screw backwards onto the shafts and are removable so that it goes into the backpack. He did the same as every other quadcopter pilot, though, and took the thing off from the grass much too close to where we were both standing next to the aircraft, with the wind blowing it straight towards us. When I pointed this out, I got the usual, “the electronics keep it in position”, whereby he tried to demonstrate to me that it would stay exactly where he put it. Needless to say, it was drifting dangerously towards his bike’s handlebars, so he had to correct it just centimetres away from breaking the blades. I would have liked to watch it for longer, because I suspect that the weather conditions might be a bit too much for it.

Anyway, the flight simulator is coming along nicely. I would include a screenshot, but it’s not easy on this Linux machine. I’m off to learn how to create an aircraft model for the simulator using Blender. It’s going to be a flying wing.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s